# A producer of inkjet printers is planning to add a new line of printers, and you have been asked to balance the process

Problem 6-4

 A producer of inkjet printers is planning to add a new line of printers, and you have been asked to balance the process, given the following task times and precedence relationships. Assume that cycle time is to be the minimum possible.
 Task Length(minutes) ImmediatePredecessor a 0.2 – b 0.4 a c 0.3 – d 1.3 b, c e 0.1 – f 0.8 e g 0.3 d, f h 1.2 g
 a. Do each of the following:
 (2) Assign tasks to stations in order of greatest number of following tasks. Use greatest positional weight as a tiebreaker rule.
 Work Station Task Assigned I II III IV
 Task Following   Tasks a [removed] b [removed] c [removed] d [removed] e [removed] f [removed] g [removed] h [removed]
 Percentage of idle time [removed] %
 (4) Compute the rate of output in printers per day that could be expected for this line assuming a 420-minute working day. (Round your answer to the nearest whole number.)
 Rate of output [removed] units per day
 (1) What is the shortest cycle time that will permit use of only two workstations? (Round your answer to 1 decimal place.)
 Shortest cycle time [removed] minutes
 (2) Determine the percentage of idle time that would result if two stations were used and each station was loaded with the worktime shown in Part b(1). (Leave no cells blank – be certain to enter “0” wherever required. Omit the “%” sign in your response.)
 Percentage of idle time [removed] %
 (3) What is the daily output under this arrangement a using the cycle time from Part b(1)? (Round your answer to 1 decimal place.)
 Daily output [removed] units per day
 (4) Determine the output rate that would be associated with using the maximum cycle time. (Round your answer to 2 decimal places.)
 Rate of output [removed] units per day

A producer of inkjet printers is planning to add a new line of printers, and you have been asked to balance the process was first posted on July 10, 2019 at 6:06 am.